8011 Aluminum Closure Sheet Manufacturer
Aluminum closure Sheet is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Such closure sheet its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.
Signi aluminum supplies aluminum sheet manufacture closures. Closure sheet applications range from screw caps for whiskey and other beverage bottles to aluminum closures for wine bottles.
Aluminum - the ideal material for the production of bottle closures:
is light weight is easily and economically recycled has superior barrier qualities has good formability offers a bright finish for decoration. |
| Aluminum Closure sheet Dimensions |
| Parameter |
Range |
Standard |
Tolerance |
| Thickness (mm) |
0.18 _ 0.25 |
0.18, 0.20 |
+0.005/-0.005 |
| Width (mm) |
50 _ 1250 |
813, 845, 833.8, 835 |
+0.5, -0 |
| Length (mm) |
400 _ 1000 |
655, 706 |
+0.5, -0 |
| Diagonal difference for sheet (mm) |
1 max |
- |
- |
| Coil sizes (mm) |
OD: 1450 max
ID: 75, 150, 300, 508 |
- |
- |
| Coil density (kg/mm) |
3.5 max |
- |
- |
| Offer for thickness and width outside the range may be quoted on specific request |
| Earing of aluminum closure sheet |
| Typical value: < 2 per cent for > =0.18 mm thickness |
| Aluminum closure Sheet Mechanical properties |
| Alloy (AA) |
Temper |
UTS (mpa) |
% E (min)
(at 50 mm gauge length) |
| Min |
Max |
| 3105 |
H14 |
150 |
200 |
1 |
| 8011 |
O |
8.5 |
12 |
15 |
| H14 |
125 |
170 |
1 |
| H24 |
125 |
160 |
1 |
| Aluminum closure Sheet Chemical composition |
| Alloy (%) |
AA 3105 |
AA 8011 |
| Fe |
0.70 |
0.6 _ 1.0 |
| Si |
0.60 |
0.5 _ 0.9 |
| Mg |
0.20 _ 0.80 |
0.05 |
| Mn |
0.3 _ 0.8 |
0.20 |
| Cu |
0.30 |
0.10 |
| Zn |
0.25 |
0.10 |
| Ti |
0.10 |
0.08 |
| Cr |
0.10 |
0.05 |
| Each (others) |
0.05 |
0.05 |
| Total (others) |
0.15 |
0.15 |
| Al |
Remaining |
Remaining |
| Single number indicates maximum content |
| Aluminum Closure Sheet Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
| Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used and the sheets are wrapped with protective thermocol sheets. |
| Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection. |
Audited Supplier 
){kind=link}
){kind=link}