| Customization: | Available |
|---|---|
| Application: | Moulding,Tooling,Marine,Boat,Tank,Armor Plate |
| Certification: | ASTM, GB, EN |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Alloy´s Characteristics | |||
| Alloy | AMP5083 | ||
| Type of Alloy | non heat treatable | ||
| Temper | homogenized and stress relieved | ||
| Surface | two surfaces precision milled, roughness ≤Ra 0.4 µm, foiled on both sides | ||
| Mechanical Properties | Typical values | ||
| Yield strength Rp0,2 | [MPa] | 110 - 140 | |
| Ultimate tensile strength Rm | [MPa] | 220 - 300 | |
| Elongation A5 | [%] | 10 - 20 | |
| Hardness HBW | [HB] | 70 - 85 | |
| Physical Properties | Typical values | ||
| Density | [g/cm³] | 2.66 | |
| Module of elasticity | [GPa] | 70 | |
| Electrical conductivity | [m/Ω · mm²] | 16 - 19 | |
| Coefficient of thermal expansion | [K-1 · 10-6] | 24.2 | |
| Thermal conductivity | [W/m · K] | 110 - 140 | |
| Processing Characteristics | |||
| Dimensional stability | Very Good | ||
| Machinability | Very Good | ||
| Erodability | Very Good | ||
| Weldability (/ TIG / MIG / ERW/EBW) | Good/ Good/ Good/Very Good | ||
| Corrosion resistance ( stress cracking/seawater / weather) | Normal/ Good/Very Good | ||
| Highest Use temperatures ( long term/Occasional) | 100/180ºC | ||
| Polishability | Very Good | ||
| Oxidability(Technical/Decorative) | Good/Not application | ||
| Contact with food (according to EN 602) | Good | ||
| Tolerances | |||
| Thickness [mm] | Flatness [mm] | Roughness | Width & Length [mm] |
| +/-0.12mm | ≤ 0.35mm/m(T≤15mm) ≤ 0.13mm/m(T>15mm) |
≤ 0.4 µm | 0/+6mm & 0/+10mm |
| Standard Stock Sizes | |||
| Plate Dimension [mm] | 1,470 × 3,000 | in thickness of 6mm - 250 mm | |
| Max Width:2500mm | 2,500 × 3,000 | Max Length:6000mm | |
| Alloy´s Characteristics | |||
| Alloy | AMP5052 | ||
| Type of Alloy | non heat treatable | ||
| Temper | homogenized and stress relieved | ||
| Surface | two surfaces precision milled, roughness ≤ 0.4 µm, foiled on both sides | ||
| Mechanical Properties | Typical values | ||
| Yield strength Rp0,2 | [MPa] | 60 - 90 | |
| Ultimate tensile strength Rm | [MPa] | 160--220 | |
| Elongation A5 | [%] | 20 - 30 | |
| Hardness HBW | [HB] | 45 - 60 | |
| Physical Properties | Typical values | ||
| Density | [g/cm³] | 2.68 | |
| Module of elasticity | [GPa] | 70 | |
| Electrical conductivity | [m/Ω · mm²] | 19 - 21 | |
| Coefficient of thermal expansion | [K-1 · 10-6] | 23.8 | |
| Thermal conductivity | [W/m · K] | 130 - 150 | |
| Processing Characteristics | |||
| Dimensional stability | Very Good | ||
| Machinability | Good | ||
| Erodability | Very Good | ||
| Weldability (/ TIG / MIG / ERW/EBW) | Good/ Good/ Good/Very Good | ||
| Corrosion resistance ( stress cracking/seawater / weather) | Normal/ Good/Very Good | ||
| Highest Use temperatures ( long term/Occasional) | 100/180ºC | ||
| Polishability | Very Good | ||
| Oxidability(Technical/Decorative) | Good/Not application | ||
| Contact with food (according to EN 602) | Good | ||
| Tolerances | |||
| Thickness [mm] | Flatness [mm] 5) | Roughness | Width & Length [mm] |
| +/-0.12mm | ≤ 0.35mm/m(T≤15mm) ≤ 0.13mm/m(T>15mm) |
≤ 0.4 µm | 0/+6mm & 0/+10mm |
| Standard Stock Sizes | |||
| Plate Dimension [mm] | 1,470 × 3,000 | in thickness of 6mm - 250 mm | |
| Max Width:2500mm | 2,500 × 3,000 | Max Length:6000mm | |
| Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
){kind=link}