5052 aluminum alloy plate for Aeronautics oil tank
Aluminium alloy 5052 alloys plate sheet contains nominally 2.5% magnesium & 0.25% chromium. It has good workability, medium static strength, high fatigue strength, good weldability, and very good corrosion resistance, especially in marine atmospheres. It also has the low density and excellent thermal conductivity common to all aluminium alloys. It is commonly used in sheet, plate and tube form.
5052 Aluminum Plate Sheet Product Features
1.Very good surface and polished bright surface, Excellent flatness control to the product ;
2.Paper interleave / single side or both sides PE coated for good surface protection ;
3.Excellent anodizing quality, excellent mechnical property ;
4.Well-protected packing ;
5.Stonger than 1*** and 3*** series aluminum ;
6.The best welding characteristics out of all the aluminums ;
7.Good formability, good resistance to corrosion .
Typical Applications Architecture, general sheet metal work, heat exchangers.
1. Alloy: 5052
2. Temper: O, H111, H112, H12,H14, H16, H18, H32, H34, H36, H38
3. Thickness: 0.2mm--200mm
4. Width: 500mm--2800mm
5. Length: 1000mm--12000mm
6. Surface: Mill finish, Bright finish, paper interleaved, one side film, both sides film
Chemical Properties of 5052
Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Ga |
V |
Others |
Aluminium min. |
Each |
Total |
5052 |
0.25 |
0.4 |
0.1 |
0.1 |
2.2-2.8 |
0.15-0.35 |
- |
0.1 |
- |
- |
- |
0.05 |
0.15 |
Remainder |