Round Edge Aluminum Strip/Tape for Dry Winding Transformer

• Customization: Available
• Application: Transformer Winding, Radiator
• Certification: ISO9001, ASTM, GB, EN
• Model NO.: 1050, 1060, 1070, 1100, 1350
• Technique: Cold Drawn
• Grade: 1000 Series
• Temper: O - H112
• Surface Treatment: Mill Finish
• Alloy: Alloy
• Alloy No.: 1050, 1060, 1070, 1100, 3003, 5052
• Tempers: O
• Thickness: 0.3-2.4 mm
• Width: 16-1850 mm
• ID: 150, 305 505 mm
• Od: 100-1800 mm
• Tensile Strength: 60-90 MPa
• Elongation: > 25%
• Transport Package: Wooden Pallet
• Specification: strip
• Trademark: signi aluminum
• Origin: Zhengzhou China
• HS Code: 76061190
• Production Capacity: 12500 Mt/Month

Product Description

Round edge Aluminum Strip/Tape for Dry Winding Transformer 

Round edge Transformer strip is used in transformers for electrical engineering and in power distribution, which means in power plants and substations, in local distribution networks, in wind power, industrial plant and the power adaptors belonging to electronic devices.







1.Application
This Specification specifies aluminium foil used as conductors for transformers
 ( hereinafter abbreviated as "foil" ).
 
2.Applicable Dimensions
The applicable dimension of foil shall conform to table 1.

Table 1
	Unit : mm
Thickness	0.3 to 2.4
Width	25 to 1250

3.Outline of the quality
3.1 The chemical composition of shall conform to table 2.

Table 2
					Unit : weight %
Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	Others		Al
								Individual	Total
max. 0.2	max. 0.25	max. 0.04	max. 0.03	max. 0.03	-	max. 0.04	max. 0.03	max. 0.03	-	min. 99.65

 
3.2 Mechanical properties and electric conductivity shall conform to Table 3.

Table 3
Thickness	Tensile strength N/mm^2(MPa)	Elongation %	Bending 180 buckling inside radius	Electric conductivity % at 20°C
Over 0.3 to 0.5	Less than 75	25min.	Close contact	62.5min
Over 0.5 to 0.8	Less than 75	30min.	Close contact	62.5min.
Over 0.8 to 1.3	Less than 75	35min.	Close contact	62.5min.
Over 1.3 to 2.0	Less than 75	35min.	Close contact	62.5min.
Over 2.0 to 2.4	Less than 75	35min.	Close contact	62.5min.

3.3 Dimensions shall conform to Table 4 which indicates dimensional tolerances.

Table 4 Unit : mm
Thickness	Tolerance in thickness		Tolerance in width
	Guaranteed value	-	25 to 300	Over 300 to 600	Over 600 to 1250
Over 0.3 to 0.5	±0.02		±0.3	±0.5	±1.0
Over 0.5 to 0.8	±0.03		±0.3	±0.5	±1.0
Over 0.8 to 1.3	±0.04		±0.3	±0.5	±1.0
Over 1.3 to 2.0	±0.04		±0.3	±0.5	±1.0
Over 2.0 to 2.4	±0.05		±0.3	±0.5	±1.0

 
3.4 Inside diameter, outside diameter and unit weight shall conform to Table 5.

Inside diameter	Outside diameter	Remarks
150mm, 305mm	1200mm	Paper core.    Special demand could be talk.
505mm
Note:The classification of Table 5 may be disregarded if particularly specified otherwise.Or Depeneding on customer's requirements.

3.5 Coil's deformation shall conform to Table 6.
Table 6.

-	-
Deformation of inside diameter	(Max. - Min.) < 10