• AA3105 H14 Aluminium Sheet for PP Caps
  • AA3105 H14 Aluminium Sheet for PP Caps
  • AA3105 H14 Aluminium Sheet for PP Caps
  • AA3105 H14 Aluminium Sheet for PP Caps
  • AA3105 H14 Aluminium Sheet for PP Caps
  • AA3105 H14 Aluminium Sheet for PP Caps

AA3105 H14 Aluminium Sheet for PP Caps

Application: Decorations, Cap
Certification: ISO9001, ASTM, GB, EN
Technique: Cold Drawn
Grade: 3000 Series
Temper: O - H112
Surface Treatment: Color Coated
Samples:
US$ 0/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Gold Member Since 2011

Suppliers with verified business licenses

Manufacturer/Factory

Basic Info.

Model NO.
3105
Alloy
Alloy
Alloy No.
3105 8011
Tempers
O,H14,H24
Thickness (mm)
0.18 _ 0.25
Width (mm)
50 _ 1250
Length (mm)
400 _ 1000
Applications
Pilfer-Proof Caps and Vial Seals
Packaging Detail
Seaworthy Wooden Pallet
Transport Package
Wooden Pallet
Specification
sheet
Trademark
Signi Aluminium
Origin
Henan China
HS Code
76061190
Production Capacity
10500 Mt/Month

Product Description

 AA3105 H14 Aluminium sheet for PP Caps

AA3105 Aluminum Sheet for bottle closure is rolled to very fine tolerances to yield more closure per tonne of stock and to allow uninterrupted operation of high-speed, multiple-cavity presses. Such closure sheet its strength, high formability, low Earring and printable surfaces make it ideal for pilfer-proof caps and vial seals.

The broad categories of ROPP closures can be defined as Plain Printed Caps, Top Embossed Caps, Knurl Embossed Chamfered Caps, Side Embossed Chamfered Caps, Deep Drawn Caps, Extra Deep Drawn Side dry offset printed caps etc.
 
Aluminum Cap sheet Dimensions                                                                    
Parameter Range Standard Tolerance
Thickness (mm) 0.18 _ 0.25 0.18, 0.20 +0.005/-0.005
Width (mm) 50 _ 1250 813, 845, 833.8, 835 +0.5, -0
Length (mm) 400 _ 1000 655, 706 +0.5, -0
Diagonal difference for sheet (mm) 1  max - -
Coil sizes (mm) OD: 1450 max
ID: 75, 150, 300, 508
- -
Coil density (kg/mm) 3.5 max - -
Offer for thickness and width outside the range may be quoted on specific request
Earing                                                                                             
Typical value: < 2 per cent for > =0.18 mm thickness
Aluminum Cap Sheet Mechanical properties                                                          
Alloy (AA) Temper UTS (mpa) % E (min)
(at 50 mm gauge length)
Min Max
3105 H14 150 200 1
8011 O 8.5 12 15
H14 125 170 1
H24 125 160 1
Aluminum Cap Sheet Chemical composition                                                          
Alloy (%) AA 3105 AA 8011
Fe 0.70 0.6 _ 1.0
Si 0.60 0.5 _ 0.9
Mg 0.20 _ 0.80 0.05
Mn 0.3 _ 0.8 0.20
Cu 0.30 0.10
Zn 0.25 0.10
Ti 0.10 0.08
Cr 0.10 0.05
Each (others) 0.05 0.05
Total (others) 0.15 0.15
Al Remaining Remaining
Single number indicates maximum content
Aluminum Cap Sheet Packing
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.
Alternatively, they are wrapped in a poly-laminated gunny or polythene, strapped with a hoop iron strap and clip and placed on a wooden pallet. Edge guards are used and the sheets are wrapped with protective thermocol sheets.
Coil: Coil is placed on wooden pallets in either eye-to-sky or eye-to-wall condition, wrapped in HDPE fabric and hardboard, and strapped with hoop iron. Silica gel packets are used for moisture protection.
AA3105 H14 Aluminium Sheet for PP Caps
AA3105 H14 Aluminium Sheet for PP Caps
AA3105 H14 Aluminium Sheet for PP Caps
AA3105 H14 Aluminium Sheet for PP Caps
 

Send your message to this supplier

*From:
*To:
avatar Mr. Alex Lu
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now