| Customization: | Available |
|---|---|
| Application: | Closure |
| Certification: | ISO9001, ASTM, GB, EN |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Closure sheet Dimensions | |||
| Parameter | Range | Standard | Tolerance |
| Thickness (mm) | 0.18 _ 0.25 | 0.18, 0.20 | +0.005/-0.005 |
| Width (mm) | 50 _ 1250 | 813, 845, 833.8, 835 | +0.5, -0 |
| Length (mm) | 400 _ 1000 | 655, 706 | +0.5, -0 |
| Diagonal difference for sheet (mm) | 1 max | - | - |
| Coil sizes (mm) | OD: 1450 max ID: 75, 150, 300, 508 |
- | - |
| Coil density (kg/mm) | 3.5 max | - | - |
| Offer for thickness and width outside the range may be quoted on specific request | |||
| Earing |
| Typical value: < 2 per cent for > =0.18 mm thickness |
| Aluminum Sheet Mechanical properties | ||||
| Alloy (AA) | Temper | UTS (mpa) | % E (min) (at 50 mm gauge length) |
|
| Min | Max | |||
| 3105 | H14 | 150 | 200 | 1 |
| 8011 | O | 8.5 | 12 | 15 |
| H14 | 125 | 170 | 1 | |
| H24 | 125 | 160 | 1 | |
| Aluminum Sheet Chemical composition | ||
| Alloy (%) | AA 3105 | AA 8011 |
| Fe | 0.70 | 0.6 _ 1.0 |
| Si | 0.60 | 0.5 _ 0.9 |
| Mg | 0.20 _ 0.80 | 0.05 |
| Mn | 0.3 _ 0.8 | 0.20 |
| Cu | 0.30 | 0.10 |
| Zn | 0.25 | 0.10 |
| Ti | 0.10 | 0.08 |
| Cr | 0.10 | 0.05 |
| Each (others) | 0.05 | 0.05 |
| Total (others) | 0.15 | 0.15 |
| Al | Remaining | Remaining |
| Single number indicates maximum content | ||
){kind=link}