As one of China's leading producers of flat rolled products, Signi's aluminium plate is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled aluminium Plate is durable and deliver long lasting performance. 5083 Defence Aluminium alloy Plate
As part of Signi' strategic plan to develop new aluminium plate materials and solutions for armoured vehicles with the highest property performance in extreme dimensions in particular with respect to thickness and width various development projects, investment programs as well as other activities have been carried out, enabling Signi to become one of the most important suppliers of aluminium armour plate products into the world's defence industry.
Signi' aluminium plates offer an optimum solution for any kind of structural application with specific ballistic performance, if required. They allow the design of light-weight, reliable and cost efficient components for light armoured
Civilian and tactical vehicles as well as for heavy constructions like military bridges. They improve strategic and tactical mobility of defence components e. G. By transpor t aircraft into combat or disaster relief which gives aluminium a comparative advantage over steel.
| |
| As one of China' s leading producers of flat rolled products, Signi' s aluminium plate is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled aluminium aluminum plate is durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts. |
| Aluminium aluminum Plate Specifications |
| Alloys (AA) |
Temper |
Thickness range (mm) |
Length range (mm) |
Width range (mm) |
1050, 1060, 1070, 1080, 1100, 1200, 3003,
3105 and 8011 |
F and O |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
5052, 5A02, 5A03, 5A05, 5251, 5182, ,
5083, 5086,
6061, 6082, 6063, 7075, 2024 |
F and O
H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates) |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
| Aluminium aluminum stretched plates |
| Thickness limit |
6 _ 70 mm |
| Length limit |
2000 _ 10000 mm |
| Aluminium aluminum Plate Chemical composition |
| Alloy (%) |
5052 |
5083 |
5086 |
5754 |
6061 |
7075 |
| Si |
0.25 |
0.40 |
0.40 |
0.40 |
0.40_ 0.80 |
0.40 |
| Fe |
0.40 |
0.40 |
0.50 |
0.40 |
0.70 |
0.50 |
| Cu |
0.10 |
0.10 |
0.10 |
0.10 |
0.15_ 0.40 |
1.2_ 2.0 |
| Mn |
0.10 |
0.40_ 1.0 |
0.20_ 0.7 |
0.50 |
0.15 |
0.30 |
| Mg |
2.2_ 2.8 |
4.0_ 4.9 |
3.5_ 4.5 |
2.6_ 3.6 |
0.8_ 1.2 |
2.1_ 2.9 |
| Cr |
0.15_ 0.35 |
0.05_ 0.25 |
0.05_ 0.25 |
0.30 |
0.04_ 0.35 |
0.18_ 0.28 |
| Ni |
_ |
_ |
_ |
_ |
_ |
_ |
| Zn |
0.10 |
0.25 |
0.25 |
0.20 |
0.25 |
5.1_ 6.1 |
| Ti |
_ |
0.15 |
0.15 |
0.15 |
0.15 |
0.20 |
| Each (Others) |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
| Total (Others) |
0.15 |
0.10 |
0.10 |
0.15 |
0.15 |
0.15 |
| Al |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
| Single number indicates maximum content. |
| Aluminium aluminum Plate Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
| Hot rolled Aluminium aluminum plate |
| As one of China' s leading producers of flat rolled products, Signi' s aluminium sheet is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts. |
| Specifications |
| Alloys (AA) |
Temper |
Thickness range (mm) |
Length range (mm) |
Width range (mm) |
1050, 1060, 1070, 1080, 1100, 1200, 3003,
3105 and 8011 |
F and O |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
5052, 5A02, 5A03, 5A05, 5251, 5182, ,
5083, 5086,
6061, 6082, 6063, 7075, 2024 |
F and O
H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates) |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
| Stretched plates |
| Thickness limit |
6 _ 70 mm |
| Length limit |
2000 _ 10000 mm |
| Chemical composition |
| Alloy (%) |
5052 |
5083 |
5086 |
5754 |
6061 |
7075 |
| Si |
0.25 |
0.40 |
0.40 |
0.40 |
0.40_ 0.80 |
0.40 |
| Fe |
0.40 |
0.40 |
0.50 |
0.40 |
0.70 |
0.50 |
| Cu |
0.10 |
0.10 |
0.10 |
0.10 |
0.15_ 0.40 |
1.2_ 2.0 |
| Mn |
0.10 |
0.40_ 1.0 |
0.20_ 0.7 |
0.50 |
0.15 |
0.30 |
| Mg |
2.2_ 2.8 |
4.0_ 4.9 |
3.5_ 4.5 |
2.6_ 3.6 |
0.8_ 1.2 |
2.1_ 2.9 |
| Cr |
0.15_ 0.35 |
0.05_ 0.25 |
0.05_ 0.25 |
0.30 |
0.04_ 0.35 |
0.18_ 0.28 |
| Ni |
_ |
_ |
_ |
_ |
_ |
_ |
| Zn |
0.10 |
0.25 |
0.25 |
0.20 |
0.25 |
5.1_ 6.1 |
| Ti |
_ |
0.15 |
0.15 |
0.15 |
0.15 |
0.20 |
| Each (Others) |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
| Total (Others) |
0.15 |
0.10 |
0.10 |
0.15 |
0.15 |
0.15 |
| Al |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
| Single number indicates maximum content. |
| Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
Audited Supplier 
){kind=link}