Bright Finish 6061t6 Aluminum Tread Checkered Plate/Sheet

• Customization: Available
• Application: Flooring, Trailer, Decking, Steps, Stairs, Building
• Certification: ISO9001, ASTM, GB, EN
• Model NO.: 6061
• Technique: Hot Rolled
• Grade: 6000 Series
• Temper: O - H112
• Surface Treatment: Embossed
• Alloy: Alloy
• Alloy No.: 6061
• Tempers: T6
• Thickness: 6 _ 300mm
• Length: 1000 _ 10000mm
• Width: 500 _ 2700mm
• Transport Package: Wooden Pallet
• Specification: China Standard
• Trademark: Signi aluminum
• Origin: Henan, China
• HS Code: 76061190
• Production Capacity: 50000 Mt/Month

Product Description

Bright Finish 6061 Aluminum Tread Checkered Plate/Sheet

The 6061 T6 aluminum tread plate has the highest corrosion resistance of all the aluminums that have been heat treated. It is an alloy that has been formed with silicon and magnesium. It has a lower strength than other comparable aluminums, but is still widely used. This is partly due to its corrosion resistance and partly due to its excellent mechanical properties. There are a variety of ways you can form 6061 aluminums, such as through machining and welding. The machinability rating of this alloy is 90 percent. It also has great joining capabilities. If needed, this product can be anodized or have other coatings applied. 

 

Available Dimension
	Mill finish Surface	Bright finish Surface
Thickness  (mm)	1.00---6.50mm	1.20---6.50mm
Pattern height	Sheet Thickness from 1.0mm to 2.0mm,  bar height: 0.50mm	Sheet Thickness from 1.0mm to 2.0mm,  bar height: 0.50mm
	Sheet Thickness from 1.0mm to 2.0mm,  bar height: 1.00mm	Sheet Thickness from 1.0mm to 2.0mm,  bar height: 1.00mm
	Sheet Thickness above 2.0mm,  bar height: 1.50mm	Sheet Thickness above 2.0mm,  bar height: 1.50mm
Width (mm)	Maximum 1500mm	Maximum 1650mm
Length (mm)	Maximum 6000mm	Maximum 6000mm
Paper interleaves	On request for selected	On request for selected
Normal size	1200×2400mm, 1219×2438mm,  1219×3048mm	1200×2400mm, 1219×2438mm,  1219×3048mm

 
 

Chemical composition of aluminum tread checkered plate
Alloy (%)	5052	5083	5086	5754	6061	7075
Si	0.25	0.40	0.40	0.40	0.40_ 0.80	0.40
Fe	0.40	0.40	0.50	0.40	0.70	0.50
Cu	0.10	0.10	0.10	0.10	0.15_ 0.40	1.2_ 2.0
Mn	0.10	0.40_ 1.0	0.20_ 0.7	0.50	0.15	0.30
Mg	2.2_ 2.8	4.0_ 4.9	3.5_ 4.5	2.6_ 3.6	0.8_ 1.2	2.1_ 2.9
Cr	0.15_ 0.35	0.05_ 0.25	0.05_ 0.25	0.30	0.04_ 0.35	0.18_ 0.28
Ni	_	_	_	_	_	_
Zn	0.10	0.25	0.25	0.20	0.25	5.1_ 6.1
Ti	_	0.15	0.15	0.15	0.15	0.20
Each (Others)	0.05	0.05	0.05	0.05	0.05	0.05
Total (Others)	0.15	0.10	0.10	0.15	0.15	0.15
Al	Remaining	Remaining	Remaining	Remaining	Remaining	Remaining
Single number indicates maximum content.

 

Packing of aluminum tread checkered plate

Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.