| Customization: | Available |
|---|---|
| Application: | Moulding,Tooling,Marine,Boat,Tank,Armor Plate |
| Certification: | ISO9001, ASTM, GB, EN |
|
Still deciding? Get samples of US$ 0/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Hot rolled plate |
| As one of China' s leading producers of flat rolled products, Signi' s aluminium sheet is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts. |
| Specifications | ||||
| Alloys (AA) | Temper | Thickness range (mm) | Length range (mm) | Width range (mm) |
| 1050, 1060, 1070, 1080, 1100, 1200, 3003, 3105 and 8011 |
F and O | 6 _ 300 | 1000 _ 10000 | 500 _ 2700 |
| 5052, 5A02, 5A03, 5A05, 5251, 5181, , 5083, 5086, 6061, 6082, 6063, 7075, 2024 |
F and O H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates) |
6 _ 300 | 1000 _ 10000 | 500 _ 2700 |
| Stretched plates | |
| Thickness limit | 6 _ 70 mm |
| Length limit | 2000 _ 10000 mm |
| Chemical composition | ||||||
| Alloy (%) | 5052 | 5083 | 5086 | 5754 | 6061 | 7075 |
| Si | 0.25 | 0.40 | 0.40 | 0.40 | 0.40_ 0.80 | 0.40 |
| Fe | 0.40 | 0.40 | 0.50 | 0.40 | 0.70 | 0.50 |
| Cu | 0.10 | 0.10 | 0.10 | 0.10 | 0.15_ 0.40 | 1.2_ 2.0 |
| Mn | 0.10 | 0.40_ 1.0 | 0.20_ 0.7 | 0.50 | 0.15 | 0.30 |
| Mg | 2.2_ 2.8 | 4.0_ 4.9 | 3.5_ 4.5 | 2.6_ 3.6 | 0.8_ 1.2 | 2.1_ 2.9 |
| Cr | 0.15_ 0.35 | 0.05_ 0.25 | 0.05_ 0.25 | 0.30 | 0.04_ 0.35 | 0.18_ 0.28 |
| Ni | _ | _ | _ | _ | _ | _ |
| Zn | 0.10 | 0.25 | 0.25 | 0.20 | 0.25 | 5.1_ 6.1 |
| Ti | _ | 0.15 | 0.15 | 0.15 | 0.15 | 0.20 |
| Each (Others) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
| Total (Others) | 0.15 | 0.10 | 0.10 | 0.15 | 0.15 | 0.15 |
| Al | Remaining | Remaining | Remaining | Remaining | Remaining | Remaining |
| Single number indicates maximum content. | ||||||
| Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
){kind=link}