6061 aluminum alloy plate for moulding
1. Alloy: 6061
2. Temper: O, T4, T451, T42, T6,T651,T62
3. Stretching capacity: 300000m2, supposed width is 2000mm, then the maximum thickness is 150mm.
4. Thickness: 1.0mm--300mm
5. With: 500mm--3000mm
6. Length: 1000mm--12000mm
7. Surface: Mill finish, Bright finish, paper interleaved, one side film, both sides film.
| Hot rolled plate |
| As one of China' s leading producers of flat rolled products, Signi' s aluminium sheet is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts. |
| Stretched plates |
| Thickness limit |
6 _ 70 mm |
| Length limit |
2000 _ 10000 mm |
| Chemical composition |
| Alloy (%) |
5052 |
5083 |
5086 |
5754 |
6061 |
7075 |
| Si |
0.25 |
0.40 |
0.40 |
0.40 |
0.40_ 0.80 |
0.40 |
| Fe |
0.40 |
0.40 |
0.50 |
0.40 |
0.70 |
0.50 |
| Cu |
0.10 |
0.10 |
0.10 |
0.10 |
0.15_ 0.40 |
1.2_ 2.0 |
| Mn |
0.10 |
0.40_ 1.0 |
0.20_ 0.7 |
0.50 |
0.15 |
0.30 |
| Mg |
2.2_ 2.8 |
4.0_ 4.9 |
3.5_ 4.5 |
2.6_ 3.6 |
0.8_ 1.2 |
2.1_ 2.9 |
| Cr |
0.15_ 0.35 |
0.05_ 0.25 |
0.05_ 0.25 |
0.30 |
0.04_ 0.35 |
0.18_ 0.28 |
| Ni |
_ |
_ |
_ |
_ |
_ |
_ |
| Zn |
0.10 |
0.25 |
0.25 |
0.20 |
0.25 |
5.1_ 6.1 |
| Ti |
_ |
0.15 |
0.15 |
0.15 |
0.15 |
0.20 |
| Each (Others) |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
| Total (Others) |
0.15 |
0.10 |
0.10 |
0.15 |
0.15 |
0.15 |
| Al |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
| Single number indicates maximum content. |
| Packing |
| Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
Audited Supplier 
){kind=link}