Application: | Transportation Tools, Marine Aluminium Sheets Plate |
---|---|
Technique: | Hot Rolled |
Grade: | 5000 Series |
Temper: | O - H112 |
Surface Treatment: | Polished |
Alloy: | Alloy |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Specifications | ||||
Alloys (AA) | Temper | Thickness (mm) |
Length (mm) |
Width (mm) |
5052,5754,5154,5086,5083, 5383, 6005A,6082 |
F and O H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plate) |
2- 300 | 1000 - 10000 | 500 - 4300 |
Chemical composition | ||||||
Alloy (%) | 5052 | 5083 | 5086 | 5754 | 6005A | 6082 |
Si | 0.25 | 0.40 | 0.40 | 0.40 | 0.50- 0.9 | 0.7~1.3 |
Fe | 0.40 | 0.40 | 0.50 | 0.40 | 0.35 | 0.50 |
Cu | 0.10 | 0.10 | 0.10 | 0.10 | 0.30 | 0.10 |
Mn | 0.10 | 0.40- 1.0 | 0.20- 0.7 | 0.50 | 0.50 | 0.40~1.0 |
Mg | 2.2- 2.8 | 4.0- 4.9 | 3.5- 4.5 | 2.6- 3.6 | 0.40~0.7 | 0.6~1.2 |
Cr | 0.15- 0.35 | 0.05- 0.25 | 0.05- 0.25 | 0.30 | 0.30 | 0.25 |
Ni | - | - | - | - | - | - |
Zn | 0.10 | 0.25 | 0.25 | 0.20 | 0.20 | 0.20 |
Ti | - | 0.15 | 0.15 | 0.15 | 0.10 | 0.10 |
Each (Others) | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 | 0.05 |
Total (Others) | 0.15 | 0.10 | 0.10 | 0.15 | 0.15 | 0.15 |
Al | Remaining | Remaining | Remaining | Remaining | Remaining | Remaining |
Single number indicates maximum content. |
Packing |
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |
Suppliers with verified business licenses