ASTM Aluminium Alloy Plate for Mould 7075 T651

• Customization: Available
• Application: Transportation Tools, Moulding,Tooling,Marine,Boat,Tank,Armor Plate
• Certification: ASTM, GB, EN
• Model NO.: 7075 T651
• Grade: 7000 Series
• Temper: T3 - T8
• Surface Treatment: Polished
• Alloy: Alloy
• Alloy No.: 7075
• Tempers: T651
• Thickness: 2-300 mm
• Width: 500-12000 mm
• Delivery Time: 15-20 Days
• Transport Package: Wooden Pallet
• Specification: China Standard
• Trademark: Signi aluminum
• Origin: Zhengzhou China
• HS Code: 76061190
• Production Capacity: 50000mt/Year

Product Description

ASTM Aluminium Alloy Plate for Mould 7075 T651

Signi products are specifically engineered to maximise the operational advantages of using aluminium alloys for today's moulding technologies, including injection moulding, RIM, structural foam moulding, vacuum forming, blow moulding and rubber moulding.






 

Hot rolled plate

As one of China' s leading producers of flat rolled products, Signi' s aluminium sheet is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts.

 

Specifications
Alloys (AA)	Temper	Thickness range (mm)	Length range (mm)	Width range (mm)
1050, 1060, 1070, 1080, 1100, 1200, 3003, 3105 and 8011	F and O	6 _ 300	1000 _ 10000	500 _ 2700
5052, 5A02, 5A03, 5A05, 5251, 5182, , 5083, 5086, 6061, 6082, 6063, 7075, 2024	F and O H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates)	6 _   300	1000 _ 10000	500 _ 2700

 

Stretched plates
Thickness limit	2-300 mm
Length limit	500-12000 mm

 

Chemical composition
Alloy (%)	5052	5083	5086	5754	6061	7075
Si	0.25	0.40	0.40	0.40	0.40_ 0.80	0.40
Fe	0.40	0.40	0.50	0.40	0.70	0.50
Cu	0.10	0.10	0.10	0.10	0.15_ 0.40	1.2_ 2.0
Mn	0.10	0.40_ 1.0	0.20_ 0.7	0.50	0.15	0.30
Mg	2.2_ 2.8	4.0_ 4.9	3.5_ 4.5	2.6_ 3.6	0.8_ 1.2	2.1_ 2.9
Cr	0.15_ 0.35	0.05_ 0.25	0.05_ 0.25	0.30	0.04_ 0.35	0.18_ 0.28
Ni	_	_	_	_	_	_
Zn	0.10	0.25	0.25	0.20	0.25	5.1_ 6.1
Ti	_	0.15	0.15	0.15	0.15	0.20
Each (Others)	0.05	0.05	0.05	0.05	0.05	0.05
Total (Others)	0.15	0.10	0.10	0.15	0.15	0.15
Al	Remaining	Remaining	Remaining	Remaining	Remaining	Remaining
Single number indicates maximum content.

 

Packing

Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.