6016/5182 Aluminum Sheet for Automobile Manufacturing

• Application: Automobile Manufacturing
• Certification: ASTM, GB, EN
• Technique: Hot Rolled
• Grade: 6000 Series
• Temper: T3 - T8
• Surface Treatment: Mill Finish
• Model NO.: 6016, 5182
• Alloy: Alloy
• Alloy No.: 6016, 5182
• Tempers: O, T4
• Thickness: 0.8-2 mm
• Length: 1000 -10000mm
• Width: 500 -2700mm
• Transport Package: Wooden Pallet
• Specification: sheet
• Trademark: Signi aluminum
• Origin: China
• HS Code: 76061190
• Production Capacity: 11000 Mt/Month

Product Description

6016/5182 Aluminum sheet for automobile manufacturing 

Signi Aluminium is capable of providing various aluminium plates and profiles for automotive industries, which can be used in truck chassis, oil tank, passenger car body panel, body structure and heat exchange system etc.

Classic alloy: 5182, 5083, 6016, 6011, 6N12, 6014, 6181A, 6009, 6005A, 6061, 6082

Product character: Good weldability, good formability, superb bake hardening ability

Hot rolled plate

As one of China' s leading producers of flat rolled products, Signi' s aluminium sheet is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts.

  

Stretched plates
Thickness limit	6 _ 70 mm
Length limit	2000 _ 10000 mm

 

Chemical composition
Alloy (%)	5052	5083	5086	5754	6061	7075
Si	0.25	0.40	0.40	0.40	0.40_ 0.80	0.40
Fe	0.40	0.40	0.50	0.40	0.70	0.50
Cu	0.10	0.10	0.10	0.10	0.15_ 0.40	1.2_ 2.0
Mn	0.10	0.40_ 1.0	0.20_ 0.7	0.50	0.15	0.30
Mg	2.2_ 2.8	4.0_ 4.9	3.5_ 4.5	2.6_ 3.6	0.8_ 1.2	2.1_ 2.9
Cr	0.15_ 0.35	0.05_ 0.25	0.05_ 0.25	0.30	0.04_ 0.35	0.18_ 0.28
Ni	_	_	_	_	_	_
Zn	0.10	0.25	0.25	0.20	0.25	5.1_ 6.1
Ti	_	0.15	0.15	0.15	0.15	0.20
Each (Others)	0.05	0.05	0.05	0.05	0.05	0.05
Total (Others)	0.15	0.10	0.10	0.15	0.15	0.15
Al	Remaining	Remaining	Remaining	Remaining	Remaining	Remaining
Single number indicates maximum content.

 

 

Packing

Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.