6061/6082 (T651 T451) Polishing Aluminium Alloy Plate
As one of China's leading producers of flat rolled products, Signi's 6061 (T651 T451) Aluminium alloy Plate is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled 6061 (T651 T451) Aluminium alloy Plate are durable and deliver long lasting performance. 6061 (T651 T451) Aluminium alloy Plate
The principle 6XXX plate alloys are 6082 and6061.
6082-T651 and 6061-T651 are now
Super seding low-carbon steels in structural
Applications where the benefits o flightness,
Specificstiffness, corrosion resistance and
Ease off abrication can be exploited:
Machined components
Structural members
Cargo containers
aluminium plate |
As one of China' s leading producers of flat rolled products, Signi' s 6061 T6 aluminium plate is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts. |
Specifications of aluminium 6061 T6 plate |
Alloys (AA) |
Temper |
Thickness range (mm) |
Length range (mm) |
Width range (mm) |
1050, 1060, 1070, 1080, 1100, 1200, 3003,
3105 and 8011 |
F and O |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
5052, 5A02, 5A03, 5A05, 5251, 5182, ,
5083, 5086,
6061, 6082, 6063, 7075, 2024 |
F and O
H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates) |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
Stretched plates |
Thickness limit |
6 _ 70 mm |
Length limit |
2000 _ 10000 mm |
Chemical composition of aluminium plate |
Alloy (%) |
5052 |
5083 |
5086 |
5754 |
6061 |
7075 |
Si |
0.25 |
0.40 |
0.40 |
0.40 |
0.40_ 0.80 |
0.40 |
Fe |
0.40 |
0.40 |
0.50 |
0.40 |
0.70 |
0.50 |
Cu |
0.10 |
0.10 |
0.10 |
0.10 |
0.15_ 0.40 |
1.2_ 2.0 |
Mn |
0.10 |
0.40_ 1.0 |
0.20_ 0.7 |
0.50 |
0.15 |
0.30 |
Mg |
2.2_ 2.8 |
4.0_ 4.9 |
3.5_ 4.5 |
2.6_ 3.6 |
0.8_ 1.2 |
2.1_ 2.9 |
Cr |
0.15_ 0.35 |
0.05_ 0.25 |
0.05_ 0.25 |
0.30 |
0.04_ 0.35 |
0.18_ 0.28 |
Ni |
_ |
_ |
_ |
_ |
_ |
_ |
Zn |
0.10 |
0.25 |
0.25 |
0.20 |
0.25 |
5.1_ 6.1 |
Ti |
_ |
0.15 |
0.15 |
0.15 |
0.15 |
0.20 |
Each (Others) |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
Total (Others) |
0.15 |
0.10 |
0.10 |
0.15 |
0.15 |
0.15 |
Al |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Single number indicates maximum content. |
Packing of aluminium plate |
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |