Enameled winding Round/Flat Aluminium Winding Wire
Enamelled aluminum round wire is a type of winding wire made by electric round aluminum rod which drawn by dies with special size, then over coated with enamel repetitiously.Enamelled
Round Aluminum Wire is a fundamental part of a winding in every electrical machine or apparatus. Compared to fibrous insulations, enamelled aluminium wire offers a favourable space
saving factor together with a high level of breakdown voltage. The main application of Enamelled Enamelled Aluminium wire is in winding of Motor and Transformers.
Product Range
1. wire thickness : 0.80--8mm
2. Wire width : 2.0--16.0mm
3. Recommended width ratio of conductor : 1.4<b/a<8.0
4. Temperature Class (C) : 130, 155, 180, 200, 220
5. Color : natural color,red,blue, green and so on
6. liackage : PT-25 PT-30 PT-60 PT-90 PT-200,PT-270, wooden bobbin and according to customer
Product Types
Class 130(155) Polyester Enamelled round aluminum wire;
Class 180 polyesterimide enameled round aluminum wire;
Class 200(220) polyesterimide over-coated with polyamide-imide enmalled round aluminum wire.
Standard of aluminum winding wire
Applicable standard or part of the reference standard :
GB/T6109/IEC60317-0-1
GB/T23312/IEC60317-0-3
MW76-A
MW35-A
The advantages of Enamelled round aluminum wire
1. Compared with the copper enameled wire, enameled aluminum wire is easier to winding, also there is a solid oxide film on the surface of enameled aluminum wire, which make it has a good insulating effect, a long life.
2. Due to the good insulating effect of aluminum film layer, it's heatresistant temperature can be 20 degrees higher than the copper wire;
3. Thegreatest benefit of using aluminum is that it is 1/3 lighter than copper which significantly lower the production costs, second it can attach to the solids easily, and third it can also reduce the freight and transportation during the operation.
Features of Enameled Round Aluminum Wire
1. Low density allows coil weight reduction
2. Rapid heat dissipation
3. High cut through
4. Excellent heat shock
5. Perfect breakdown voltage
6. High heat resistance
7. Good solvent resistance
| Type |
Polyesterimide |
Polyimide and polyimide
mixed |
Polyvinyl acetal |
Thermal bonding acetal |
| Temperature-resist grade |
180 |
200 |
120(155) |
120 |
| Property |
High heat resistance,
good chemical
resistance, hydrolysis
resistance |
Excellent heat resistance,
strong resistance to
chemical solvents, good
scratch resistance |
Excellent resistance to transformer
oil, good resistance to scratch,
excellent flexibility and adhesion,
and good water resistance. |
In addition to all the performance
with acetal, also can obtain good
adhesion strength by the heating
mode |
| Standard |
GB/T7095.4-2008, IEC60317-28 |
GB/T7095.6-2008, IEC60317-29 |
GB/T7095.2-2008, IEC60317-18 |
|
Testing
Standard |
GB/T4074, IEC60851-1-6 |
Application of Enameled aluminum wire
1. Microwave transformers;
2. Requirements for the production of light weight, relatively high conductivity, heat resistance and good windings, especially the transmission of high frequency signal windings;
3. Manet wires used in high-frequency voltage devices, common transformer, inductance coils, electromotors, household electrical and micro-motos;
4. Enamelled wire used in small-motor rotor winding .etc.
5. Magnet wires used in monitor deflection coil;
6. Magnet wires used in degaussing coil;
7. Other special magnet wire.
Audited Supplier 
){kind=link}
){kind=link}