Enamelled/Fiber Glass Round/Flat/Square Aluminium Wire
Enamelled aluminum wire is a type of winding wire made by electric round aluminum rod which drawn by dies with special size, then over coated with enamel repetitiously.Enamelled
Round Aluminum Wire is a fundamental part of a winding in every electrical machine or apparatus. Compared to fibrous insulations, enamelled aluminium wire offers a favourable space
saving factor together with a high level of breakdown voltage. The main application of Enamelled Enamelled Aluminium wire is in winding of Motor and Transformers.
aluminum wire specification
1. Diameter: 0.80--8mm
2. Recommended width ratio of conductor : 1.4<b/a<8.0
3. Temperature Class (C) : 130, 155, 180, 200, 220
4. Color : natural color,red,blue, green and so on
5. liackage : PT-25 PT-30 PT-60 PT-90 PT-200,PT-270,
Material of aluminum wire
Drawing or extruding bare aluminum wire confirm to National Standard, smooth surface, no defects ;Good performance,Insulation varnish.
| Type |
Polyesterimide
|
Polyimide and polyimide
mixed
|
Polyvinyl acetal
|
Thermal bonding acetal
|
| Temperature-resist grade |
180 |
200 |
150 |
130 |
| Property |
High heat resistance,
good chemical
resistance, hydrolysis
resistance
|
Excellent heat resistance,
strong resistance to
chemical solvents, good
scratch resistance
|
Excellent resistance to
transformer oil, good
resistance to scratch,
excellent flexibility and
adhesion, and good
water resistance.
|
In addition to all the
performance with acetal, also can
obtain good
adhesion strength by
the heating
mode |
| Standard |
GB/T7095.4-2008,
IEC60317-28 |
GB/T7095.6-2008,
IEC60317-29
|
GB/T7095.2-2008,
IEC60317-18
|
|
aluminum wire Types
Class 130(155) Polyester Enamelled round aluminum wire;
Class 180 polyesterimide enameled round aluminum wire;
Class 200(220) polyesterimide over-coated with polyamide-imide enmalled round aluminum wire.
Standard of aluminum wire
Applicable standard or part of the reference standard :
GB/T6109/IEC60317-0-1
GB/T23312/IEC60317-0-3
MW76-A
MW35-A
The advantages of aluminum wire
1. Compared with the copper enameled wire, enameled aluminum wire is easier to winding, also there is a solid oxide film on the surface of enameled aluminum wire, which make it has a good insulating effect, a long life.
2. Due to the good insulating effect of aluminum film layer, it's heatresistant temperature can be 20 degrees higher than the copper wire;
3. Thegreatest benefit of using aluminum is that it is 1/3 lighter than copper which significantly lower the production costs, second it can attach to the solids easily, and third it can also reduce the freight and transportation during the operation.
Features of Aluminum Wire
Low density allows coil weight reduction
Rapid heat dissipation
High cut through
Excellent heat shock
Perfect breakdown voltage
High heat resistance
Good solvent resistance
Application of aluminum wire
1. Microwave transformers;
2. Requirements for the production of light weight, relatively high conductivity, heat resistance and good windings, especially the transmission of high frequency signal windings;
3. Manet wires used in high-frequency voltage devices, common transformer, inductance coils, electromotors, household electrical and micro-motos;
4. Enamelled wire used in small-motor rotor winding .etc.
5. Magnet wires used in monitor deflection coil;
6. Magnet wires used in degaussing coil;
7. Other special magnet wire.
Audited Supplier 
){kind=link}
){kind=link}