5083 Aluminium Plate for Defence Industry

• Application: Transportation Tools
• Certification: ASTM, GB, EN
• Technique: Hot Rolled
• Grade: 5000 Series
• Temper: O - H112
• Surface Treatment: Polished
• Model NO.: 5083
• Alloy: Alloy
• Alloy No.: 5083
• Tempers: H32, H42, H111
• Thickness: 0.5-10 mm
• Width: 500-3500mm
• Length: 1000-12000mm
• Transport Package: Wooden Pallet
• Specification: China Standard
• Trademark: Signi aluminum
• Origin: Henan China
• HS Code: 76061190
• Production Capacity: 50000mt/Month

Product Description

5083 Aluminium Plate for Defence Industry

As one of China's leading producers of flat rolled products, Signi's aluminium plate is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled aluminium Plate is durable and deliver long lasting performance. 5083 Aluminium Plate for defence industry


The Signi alloy was originally developed for the challenging corrosion requirements of the international shipbuilding industry. Signi has been further developed to make it applicable to the defence industry, where corrosion performance is an essential operational requirement. For example, not only for amphibious vehicles but also for other armoured vehicles in corrosive environments due to chemical / biological exposure or the extreme environment conditions seen through operational deployment throughout the life time of such vehicles.
Today's economic expectations are leading to extended life cycles for current and
Future military platforms requiring new materials like Signi with outstanding corrosion resistance and excellent ballistic protection.

5083 Aluminium Plate for defence industry

As one of China' s leading producers of flat rolled products, Signi' s aluminium plate is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled aluminium aluminum plate is durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts.

 

Aluminium aluminum Plate Specifications
Alloys (AA)	Temper	Thickness range (mm)	Length range (mm)	Width range (mm)
1050, 1060, 1070, 1080, 1100, 1200, 3003, 3105 and 8011	F and O	6 _ 300	1000 _ 10000	500 _ 2700
5052, 5A02, 5A03, 5A05, 5251, 5182, , 5083, 5086, 6061, 6082, 6063, 7075, 2024	F and O H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates)	6 _   300	1000 _ 10000	500 _ 2700

 

Aluminium aluminum stretched plates
Thickness limit	6 _ 70 mm
Length limit	2000 _ 10000 mm

 

Aluminium aluminum Plate Chemical composition
Alloy (%)	5052	5083	5086	5754	6061	7075
Si	0.25	0.40	0.40	0.40	0.40_ 0.80	0.40
Fe	0.40	0.40	0.50	0.40	0.70	0.50
Cu	0.10	0.10	0.10	0.10	0.15_ 0.40	1.2_ 2.0
Mn	0.10	0.40_ 1.0	0.20_ 0.7	0.50	0.15	0.30
Mg	2.2_ 2.8	4.0_ 4.9	3.5_ 4.5	2.6_ 3.6	0.8_ 1.2	2.1_ 2.9
Cr	0.15_ 0.35	0.05_ 0.25	0.05_ 0.25	0.30	0.04_ 0.35	0.18_ 0.28
Ni	_	_	_	_	_	_
Zn	0.10	0.25	0.25	0.20	0.25	5.1_ 6.1
Ti	_	0.15	0.15	0.15	0.15	0.20
Each (Others)	0.05	0.05	0.05	0.05	0.05	0.05
Total (Others)	0.15	0.10	0.10	0.15	0.15	0.15
Al	Remaining	Remaining	Remaining	Remaining	Remaining	Remaining
Single number indicates maximum content.

 

Aluminium aluminum Plate Packing

Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.

 

Hot rolled Aluminium aluminum plate

As one of China' s leading producers of flat rolled products, Signi' s aluminium sheet is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts.

 

Specifications
Alloys (AA)	Temper	Thickness range (mm)	Length range (mm)	Width range (mm)
1050, 1060, 1070, 1080, 1100, 1200, 3003, 3105 and 8011	F and O	6 _ 300	1000 _ 10000	500 _ 2700
5052, 5A02, 5A03, 5A05, 5251, 5182, , 5083, 5086, 6061, 6082, 6063, 7075, 2024	F and O H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates)	6 _   300	1000 _ 10000	500 _ 2700

 

Stretched plates
Thickness limit	6 _ 70 mm
Length limit	2000 _ 10000 mm

 

Chemical composition
Alloy (%)	5052	5083	5086	5754	6061	7075
Si	0.25	0.40	0.40	0.40	0.40_ 0.80	0.40
Fe	0.40	0.40	0.50	0.40	0.70	0.50
Cu	0.10	0.10	0.10	0.10	0.15_ 0.40	1.2_ 2.0
Mn	0.10	0.40_ 1.0	0.20_ 0.7	0.50	0.15	0.30
Mg	2.2_ 2.8	4.0_ 4.9	3.5_ 4.5	2.6_ 3.6	0.8_ 1.2	2.1_ 2.9
Cr	0.15_ 0.35	0.05_ 0.25	0.05_ 0.25	0.30	0.04_ 0.35	0.18_ 0.28
Ni	_	_	_	_	_	_
Zn	0.10	0.25	0.25	0.20	0.25	5.1_ 6.1
Ti	_	0.15	0.15	0.15	0.15	0.20
Each (Others)	0.05	0.05	0.05	0.05	0.05	0.05
Total (Others)	0.15	0.10	0.10	0.15	0.15	0.15
Al	Remaining	Remaining	Remaining	Remaining	Remaining	Remaining
Single number indicates maximum content.

 

Packing

Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection.