As one of China's leading producers of flat rolled products, Signi's Aluminium Plate 6061 (T651, T451) is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled Aluminium Plate 6061 (T651, T451) are durable and deliver long lasting performance. Aluminium Plate 6061 (T651, T451)
The principle 6XXX plate alloys are 6082 and
6061.
6082-T651 and 6061-T651 are now
Super seding low-carbon steels in structural
Applications where the benefits o flightness,
Specificstiffness, corrosion resistance and
Ease off abrication can be exploited:
Machined components
Structural members
Cargo containers
6061 T6 aluminium plate |
As one of China' s leading producers of flat rolled products, Signi' s 6061 T6 aluminium plate is produced from its own cast slabs or continuous cast coils, rolled down to customised thickness, gauge and tolerances. Our hot rolled plates are durable and deliver long lasting performance. Application areas: Electrical busbars and ducting, ships, boates, tanks, defence and industrial uses, aircrafts. |
Specifications of aluminium 6061 T6 plate |
Alloys (AA) |
Temper |
Thickness range (mm) |
Length range (mm) |
Width range (mm) |
1050, 1060, 1070, 1080, 1100, 1200, 3003,
3105 and 8011 |
F and O |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
5052, 5A02, 5A03, 5A05, 5251, 5182, ,
5083, 5086,
6061, 6082, 6063, 7075, 2024 |
F and O
H111, H112, T4, T6 (For 6061, 6063), T651(Stretched plates) |
6 _ 300 |
1000 _ 10000 |
500 _ 2700 |
Stretched plates |
Thickness limit |
6 _ 70 mm |
Length limit |
2000 _ 10000 mm |
Chemical composition of aluminium 6061 T6 plate |
Alloy (%) |
5052 |
5083 |
5086 |
5754 |
6061 |
7075 |
Si |
0.25 |
0.40 |
0.40 |
0.40 |
0.40_ 0.80 |
0.40 |
Fe |
0.40 |
0.40 |
0.50 |
0.40 |
0.70 |
0.50 |
Cu |
0.10 |
0.10 |
0.10 |
0.10 |
0.15_ 0.40 |
1.2_ 2.0 |
Mn |
0.10 |
0.40_ 1.0 |
0.20_ 0.7 |
0.50 |
0.15 |
0.30 |
Mg |
2.2_ 2.8 |
4.0_ 4.9 |
3.5_ 4.5 |
2.6_ 3.6 |
0.8_ 1.2 |
2.1_ 2.9 |
Cr |
0.15_ 0.35 |
0.05_ 0.25 |
0.05_ 0.25 |
0.30 |
0.04_ 0.35 |
0.18_ 0.28 |
Ni |
_ |
_ |
_ |
_ |
_ |
_ |
Zn |
0.10 |
0.25 |
0.25 |
0.20 |
0.25 |
5.1_ 6.1 |
Ti |
_ |
0.15 |
0.15 |
0.15 |
0.15 |
0.20 |
Each (Others) |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
0.05 |
Total (Others) |
0.15 |
0.10 |
0.10 |
0.15 |
0.15 |
0.15 |
Al |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Remaining |
Single number indicates maximum content. |
Packing of aluminium 6061 T6 plate |
Sheet: Sheets are placed in wooden boxes on wooden skids with runners along the length of the sheet. They are wrapped in HDPE with hardboard on top and bottom of the stack. Hoop iron strapping runs along the length of the sheets. Silica gel packets are put in the boxes for moisture protection. |