2014 Aluminum Plate Sheet
Alloy 2014 aluminum plate sheet is an aluminium-based alloy often used in the aerospace industry.
It is easily machined in certain tempers, and among the strongest available aluminium alloys, as well as having high hardness. However, it is difficult to weld, as it is subject to cracking.
Alloy 2014 aluminum plate sheet is the second most popular of the 2000-series aluminum alloys, after 2024 aluminum alloy. It is commonly extruded and forged. The corrosion resistance of this alloy is particularly poor. To combat this, it is often clad with pure aluminum. If unclad 2014 aluminum is to be exposed to the elements, it should be painted as a corrosion protection measure.
Alloy: 2014
Temper: O,T3,T4,T451,T42,T6,T651,T62
Stretching capacity: 300000m2, supposed width is 2000mm, then the maximum thickness is 150mm.
Thickness: 1.0mm--300mm
With: 500mm--3000mm
Length: 1000mm--12000mm
Surface: Mill finish, Bright finish, paper interleaved, one side film, both sides film.
Chemical Properties
| Alloy |
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
Ga |
V |
Others |
Aluminium
min. |
| Each |
Total |
| 2014 |
0.5-1.2 |
0.7 |
3.9-5.0 |
0.4-1.2 |
0.2-0.8 |
0.1 |
- |
0.25 |
0.15 |
- |
- |
0.05 |
0.15 |
Remainder |
Audited Supplier 
2014 Aluminum Plate Sheet
){kind=link}
){kind=link}